Produttore - Made by
PRINT s.r.l.
via M. Gandhi, 12
20851 Lissone (MB) ITALY
info@onedesign.bike
PRINT s.r.l.
via M. Gandhi, 12
20851 Lissone (MB) ITALY
info@onedesign.bike
Universal Straps were designed to safely transport any handlebar-equipped vehicle (motorcycles, scooters, jet skis, ATVs, motocross bikes, bicycles) on trailers or in vans, using tension bushings.
Two bushings are fitted onto the handlebar, without damaging the grips, and connected in opposition to form an 'X'.
Tightening the straps with their ratchets compresses the forks downward by approximately 5-10 cm.
During transport the vehicle then has no fork compression or extension, remaining locked and secure.
To prevent abrasion on tanks and delicate parts, the straps run inside a rubber sleeve.
RATCHET WITH 600 KG BREAKING LOAD.
The pulling point is applied at the centre, not on the handlebar grips, preventing damage or bending of the half-handlebars.
The straps are stitched to opposing yellow sleeves and run inside the rubber sleeve.
Colours may differ slightly from the photos shown.
Two bushings are fitted onto the handlebar, without damaging the grips, and connected in opposition to form an 'X'.
Tightening the straps with their ratchets compresses the forks downward by approximately 5-10 cm.
During transport the vehicle then has no fork compression or extension, remaining locked and secure.
To prevent abrasion on tanks and delicate parts, the straps run inside a rubber sleeve.
RATCHET WITH 600 KG BREAKING LOAD.
The pulling point is applied at the centre, not on the handlebar grips, preventing damage or bending of the half-handlebars.
The straps are stitched to opposing yellow sleeves and run inside the rubber sleeve.
Colours may differ slightly from the photos shown.
